Advanced Search
Showing products: 1 through 25 (41 total)

1/2" Cross Section Vee Rings

Our Vee packings are essentially multiple-lip (chevron) seals comprised of a group of endless rings.  They are popular for sealing rods and pistons.

1/2" Cross Section Vee Sets

1/2" is a 1-3-1 Stack Height.  Center is Duck Fabric.  Male/Female is a Phenolic Hard Scraper.

Specifications

Application: Hydraulic Service
Design: Rod or Piston
Pressure Rating: Determined by Stack Height

1/4" Cross Section Soft Neoprene U-Cups

The standard U-cup, which has a square cross section, is known as the 6226 Series. They are typically made with 80 Buna-N, although other compounds are available on request. The 6226 Series are for general purpose, low pressure air and hydraulic use. Compounds from neoprene exhibit fair oil resistance, good ozone & weather resistance. U-cups are available in various shapes, size ranges and homogeneous or fabric reinforced compounds. U-cups are most often used for sealing rams or rods, although they also can be adapted to piston sealing applications. The U-cup selection should be made on the basis of inside or outside sealing, operating pressure, temperature, and the type of air or fluid medium in which the cup must function.  70-75 Buna-N Durometer.

1/4" Cross Section Vee Rings

Our Vee packings are essentially multiple-lip (chevron) seals comprised of a group of endless rings.  They are popular for sealing rods and pistons.

1/4" Cross Section Vee Sets

This is a 1-4-1 Set.  Center is Duck Fabric.  Male/Female is a Phenolic Hard Scraper.

Specifications

Application: Hydraulic Service
Design: Rod or Piston
Pressure Rating: Determined by Stack Height

1/8" Cross Section Soft Neoprene U-Cups

The standard U-cup, which has a square cross section, is known as the 6226 Series. They are typically made with 80 Buna-N, although other compounds are available on request. The 6226 Series are for general purpose, low pressure air and hydraulic use. Compounds from neoprene exhibit fair oil resistance, good ozone & weather resistance. U-cups are available in various shapes, size ranges and homogeneous or fabric reinforced compounds. U-cups are most often used for sealing rams or rods, although they also can be adapted to piston sealing applications. The U-cup selection should be made on the basis of inside or outside sealing, operating pressure, temperature, and the type of air or fluid medium in which the cup must function. 70-75 Buna-N Durometer.

3/16" Cross Section Soft Neoprene U-Cups

The standard U-cup, which has a square cross section, is known as the 6226 Series. They are typically made with 80 Buna-N, although other compounds are available on request. The 6226 Series are for general purpose, low pressure air and hydraulic use. Compounds from neoprene exhibit fair oil resistance, good ozone & weather resistance. U-cups are available in various shapes, size ranges and homogeneous or fabric reinforced compounds. U-cups are most often used for sealing rams or rods, although they also can be adapted to piston sealing applications. The U-cup selection should be made on the basis of inside or outside sealing, operating pressure, temperature, and the type of air or fluid medium in which the cup must function. 70-75 Buna-N Durometer.

3/16" Cross Section Vee Rings

Our Vee packings are essentially multiple-lip (chevron) seals comprised of a group of endless rings.  They are popular for sealing rods and pistons.

3/8" Cross Section Soft Neoprene U-Cups

The standard U-cup, which has a square cross section, is known as the 6226 Series. They are typically made with 80 Buna-N, although other compounds are available on request. The 6226 Series are for general purpose, low pressure air and hydraulic use. Compounds from neoprene exhibit fair oil resistance, good ozone & weather resistance. U-cups are available in various shapes, size ranges and homogeneous or fabric reinforced compounds. U-cups are most often used for sealing rams or rods, although they also can be adapted to piston sealing applications. The U-cup selection should be made on the basis of inside or outside sealing, operating pressure, temperature, and the type of air or fluid medium in which the cup must function.  70-75 Buna-N Durometer.

3/8" Cross Section Vee Rings

Our Vee packings are essentially multiple-lip (chevron) seals comprised of a group of endless rings.  They are popular for sealing rods and pistons.

3/8" Cross Section Vee Sets

This is a 1-4-1 Set.  Center is Duck Fabric.  Male/Female is a Phenolic Hard Scraper.

Specifications

Application: Hydraulic Service
Design: Rod or Piston
Pressure Rating: Determined by Stack Height

5/16" Cross Section Soft Neoprene U-Cups

The standard U-cup, which has a square cross section, is known as the 6226 Series. They are typically made with 80 Buna-N, although other compounds are available on request. The 6226 Series are for general purpose, low pressure air and hydraulic use. Compounds from neoprene exhibit fair oil resistance, good ozone & weather resistance. U-cups are available in various shapes, size ranges and homogeneous or fabric reinforced compounds. U-cups are most often used for sealing rams or rods, although they also can be adapted to piston sealing applications. The U-cup selection should be made on the basis of inside or outside sealing, operating pressure, temperature, and the type of air or fluid medium in which the cup must function. 70-75 Buna-N Durometer.

5/16" Cross Section Vee Rings

Our Vee packings are essentially multiple-lip (chevron) seals comprised of a group of endless rings.  They are popular for sealing rods and pistons.

5/16" Cross Section Vee Sets

This is a 1-4-1 Set.  Center is Duck Fabric.  Male/Female is a Phenolic Hard Scraper.

Specifications

Application: Hydraulic Service
Design: Rod or Piston
Pressure Rating: Determined by Stack Height

90 Durometer O-Rings

90 Durometer O-Rings for hydraulic and pneumatic applications.

Specifications

Air Inclusion (ML): 10 O-Rings per pack.
Packaging: O-Rings are measured by inside diameter (ID) and cross section width (W) dimensions are given in inches.

900 Series O-Rings

O-Rings for straight thread tube fittings.  Conforms to SAE J151A 90 durometer Buna-N.

Back-Up Ring Kit

90 Durometer seals.  Kit includes 364 pieces.  12 pieces each of Part Number 006-012 and 14 pieces each of 110-116 and 14 also of 210 - 222.

Back-Up Rings

Back-Up Rings are made with polyurethane and are 90 durometer shore hardness.  Use in conjunction with an o-ring to prevent extrusion.  They are much harder than rubber o-rings, yet they deform enough to block off clearance to the o-ring.

Female British O-Ring Kit

Kit includes 100 pieces

Flange O-Ring Kit

Kit includes 40 pieces

Flat Face O-Ring Kit

90 Durometer seals.  Kit includes 70 pieces - 10 each of Part Numbers 011, 012, 014, 016, 018, 021 and 025.

Heavy Duty Rod Wiper/Scraper

The "WP" design was developed as a dust wiper (scraper) for reciprocating applications such as hydraulic cylinder rods.

Heavy Duty Rod Wipers

Heavy Duty Rod Wipers Material: 395A Liquid Cast Polyurethane

Specifications

Features: ·Long Life

Internal Retaining Rings

External Retaining Rings Available.  Standard material:  carbon spring steel

Metric Nitrile Kit

70 Durometer seals.  Kit includes 385 pieces.

Showing products: 1 through 25 (41 total)
moc/sciluardyhsetatslla//ofni Info 1