Advanced Search
Showing products: 1 through 25 (128 total)

Bezares 1000 Series Truck PTOs

Brand: Bezares

The 1000 and 2000 Series PTO's have been engineered to work with the most common transmissions in today's market. Offered in a wide range of input gear, ratio, output, and shifter options, these cast iron PTO's include large 12mm flange bolts, which make for a very sturdy and durable pump mount, supporting some of the larger pumps in the market.  Both of these models are also available in a deep mount 1010 and i2010 series.  All Bezares PTO's are built with the highest quality bearings and sealing components available.

F Series Valves

Economically designed for effective control of hydraulic and pneumatic actuators where frequent adjustment is not required.

Specifications

Features: Soft seat piston check for leak-free service.
Optional ball check for high cycle applications.
Wrench flats provided to adjust setting, while resisting unwanted tampering.
Steel valves are zinc plated and sealed with chromatic for double corrosion protection.

FPD Series Canister Filter

In-Line Filter - Medium Pressure

Features:

  • Pressures up to 350 PSI (24 Bar)
  • Flows to 75 GPM (284 LPM)
  • Suction and Return Line Models
  • Cellulose and Wire Mesh Media

Model RD-1800 - Ball/Spring Type Direct-Acting Relief Valve

Brand: Prince

The Prince RD-1800 Valve is a direct acting ball/spring type pressure relief. The valve is compact and simple in design. This type relief is fast opening and is well suited for pressure spike protection. The performance curves below indicate the low cracking pressure typical to ball/spring reliefs. The valve has a standard steel seat, externally adjustable.

Specifications

Adjustment Range: 1000 to 2500 psi
Capacity: 20 GPM
Maximum Operating Pressure: 2500 psi
Note: Relief settings are 1500 psi @ 12 gpm. For non-standard relief settings specify PSI in hundreds and GPM after model number. Example: RD-1850S-12-10 for 1200 PSI @ 10 GPM

Permco Spin-On Hydraulic Filter Elements

Brand: Permco

A series  of spin-on filter elements are accessorized with a selection of filter heads for a variety of applications.  Indicators, gage ports and by-pass valves are available to customize each application.

Hydraulic fluids are efficiently filtered through return line applications.  Maximum working pressure 100 PSI/Burst 300 PSI.

Used for:

·Off Highway    ·Ground Transportation      ·Mobile Equipment      ·Industrial in-plant equipment      ·Marine hydraulic systems

Prince LS3000 Series - Log Splitter Valve

Brand: Prince

STANDARD FEATURES:

  • Handle can be installed in "up" or "down" position
  • Detent release pressure adjustable from 1000 to 2000 PSI
  • Relief valve adjustable up to 2750 PSI
  • Pressure release detent spring center to neutral is 1200 PSI
  • Not convertible from open center to closed center

Specifications

Flow Rating: For use with system flows up to 25 GPM MAX
Max Design and Test Pressure: Relief valve adjustable up to 2750 PSI
Max Operating Temp: 180° F
Maximum Tank Port Pressure: 150 PSI
Note: This valve has one position pressure release (handle in) with spring center to neutral
In exposed environments do not mount with spool vertical and handle end down
Recommended Filtration: ISO 4406 17/14
Relief Valve Setting: 2250 PSI
Weight: 10 LBS

Prince SP20B Series Hydraulic Gear Pump

Brand: Prince

Style: SAE "A" Flange Pump - 2 Bolt Mount

The SP20B pump now utilizes self-lubricating thrust blocks that eliminate the need for seperate wear plates.  They are made from a high strength aluminum alloy with exceptional anti-galling properties.  This new thrust block design also incorporates advanced bearings designed specifically for high pressure hydraulic pumps.  This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying capabilities and cavitation resistance even at low speeds and moderate levels of contamination.  Also, since the PTFE resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced.  This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

 

Specifications

Features: Patented Non-Symmetrical Gears - The adoption of non-symmetrical gears insures greater power per unit volume compared with pumps of conventional design. The compact gear has enabled high-pressure operation. The increased number of gear teeth has reduced the flow pulsation and minimized the noise.
Bearings - PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination.
Gears and Drive Shaft - Made of hardened alloy steel of one piece construction.
Special Gear Design - Non-symmetrical gear insures low noise and compactness.
Highest Quality Workmanship - Proudly made in the USA!
Pressures up to 3000 PSI.
Dependable Service - Balanced pressure loading insures small dispersion, good durability and maintains high performance.
Extremely efficient.
Perfect Alignment - "Through bore" design provides perfect alignment of pump element and assures even bearing load.
With the aluminum alloy casing, the SP Series features light weight and easy handling.
Working oil - a mineral based oil with additives to resist corrosion, oxidation, and foaming is recommended. Viscosity at any running condition should be 60 SUS minimum and 250 SUS maximum. 180°F is the maximum recommended system operating temperature.
Per ISO cleanliness code level 17/14. As a minimum, 10 micron filtration is recommended.

Sight Level Gauge

5" & 10" slotted for side viewing

Steel Side Mount Truck Mount Hydraulic Tanks

Specifications

Features: Steel tank assembly--fully baffled, with pre-punched and slotted 2"x2" mounting angles
Two 2" NPT suction ports, two 1-1/4" return line ports, magnetic drain plug, on 2" port plug and one 1-1/4" port plug
Powder coated black
Filler/breather-including 40 micron filter/breather cap (chain mounted) with nylon strainer basket and bayonet closure
Oil level and temperature sight gauge

Versa-Pak Flow Control/Unloader System

Brand: Permco

The Versa-pak Flow Control/Unloader unit is ideal for most residential and commercial refuse hydraulic systems.  Applications include residential and commercial front loaders, rear loaders, automated side loaders, compactors, roll-offs, recycle and all PTO driven pump applications.

The Flow Control/Unloader configuration has both the Flow Control and Unloader function.  By flipping a switch on the dash, the operator can go in to the Unload mode where full flow is diverted back to the tank at low pressure.  This function reduces system heat buildup and horsepower losses resulting in substantial vehical fuel efficiencies.

White WR Series Motor

Brand: White Drive Products

The WR Series motor incorporates the latest advances for smooth performance, efficiency and durability.  It features an optimized Roller Stator® geometry with seven precision rollers to eliminate sliding friction and provide rolling contact between the rotor and stator.  This increases motor efficiency.  A three-zone spool valve, integral check valves and a provision for a case drain reduce pressure on internal seals to improve product life.  A wide variety of mounting, shaft, motor displacement and porting options are available to meet all application needs.

Specifications

Features: High pressure shaft seal offers superior seal life and performance
Spool Valve Design gives superior performance and smooth operation over a wide speed and torque range
Built in check valves in the housing offers versatility and increased seal life
Optimized Roller Stator® geometry provides a smooth running high efficient product
Variety of mounts and shafts provides flexibility in application design

22 Series - Tank Mounted Return Line Filter Assembly

Ideally suited for power units, mobile equipment, machine tools and test equipment.  Side mount capability.  Excellent alternative to spin-ons when space is at a premium.

Features:

·Cast aluminum head

·Steel bowl

·Optional 2nd inlet port

·Variety of port sizes

·Elements interchange with Shroeder "K" Series

·Indicator ports available

·Options:  magnet, check valve, and mounting kits

Specifications

By-Pass Valve: 15 or 25 PSI available
Flow Rating: 100 GPM (378 LPM)
Operating Temperature: 225° F
Working Pressure: 100 PSI (6.9 BAR)

Bezares 2000 Series Truck PTOs

Brand: Bezares

The 1000 and 2000 Series PTO's have been engineered to work with the most common transmissions in today's market. Offered in a wide range of input gear, ratio, output and shifter options, these all cast iron PTO's include large 12mm flange bolts, which make for a very study and durable pump mount, supporting some of the larger pumps in the market.  Both of these models are also available in a deep mount 1010 and i2010 series.  All Bezares PTO's are built with the highest quality bearings and sealing component available.

KLF Series Flow Control Valves

B at the end of the order number denotes that it is brass.

Specifications

Features: Provides metered flow in one direction & free-flow in the reverse direction.
Lock nut included to secure flow setting.
Soft-seat piston check for leak-free service.
Ball check option available for high cycle applications.
Rugged, all-metal construction - no plastic parts.
Maximum operating pressure - 2000 psi for brass.

Permco Filter Spin-On Heads

Brand: Permco

Prince Model RV Differential Poppet Inline Relief Valve

Brand: Prince

The Prince valve model RV is a differential poppet type inlet relief.  The valve is made up of a relief cartridge and a cast iron valve body.  The differential poppet type relief provides smooth quiet performance with a minimum variation between cracking and full flow pressures.  This type relief is also less sensitive to system contamination.  The model RV is well suited as a system relief up to 30 GPM and 3000 PSI.  It is available in two pressure ranges and both an externally adjustable and shim adjustable version.

Specifications

Capacity: 30 GPM max inlet flow
Maximum Operating Pressure: 3000 PSI

Prince SP25A Series Hydraulic Gear Pump

Brand: Prince

Style: SAE "B" Flange Pump - 2 Bolt Mount

The SP25A pump now utilizes self-lubricating thrust blocks that eliminate the need for seperate wear plates.  They are made from a high strength aluminum alloy with exceptional anti-galling properties.  This new thrust block design also incorporates advanced bearings designed specifically for high pressure hydraulic pumps.  This new bearing features a robust fluropolymer PTFE wear surface that yields unsurpassed load carrying capabilites and cavitations resistance even at low speeds and moderate levels of contamination.  Also, since the PTFE resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced.  This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

 

Specifications

Features: Patented Non-Symmetrical Gears - the adoption of non-symmetrical gears insures greater power per unit volume compared with pumps of conventional design. The compact gear compartment has enabled high-pressure operation. The increased number of gear teeth has reduced the flow pulsation and minimized the noise.
Bearings - PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination.
Gears and Drive Shaft - Made of hardened alloy steel of one piece construction.
Special Gear Design - Non-symmetrical gear insures low noise and compactness.
Highest Quality Workmanship - Proudly made in the USA!
Pressures up to 3000 PSI.
Dependable Service - Balanced pressure loading insures small dispersion, good durability and maintains high performance.
Extremely efficient.
Perfect Alignment - "Through bore" design provides perfect alignment of pump element and assures even bearing load.
With the aluminum alloy casing, the SP Series features light weight and easy handling.
Working oil - a mineral based oil with additives to resist corrosion, oxidation, and foaming is recommended. Viscosity at any running condition should be 60 SUS minimum and 250 SUS maximum. 180°F is the maximum recommended system operating temperature.
Per ISO cleanliness code level 17/14. As a minimum, 10 micron filtration is recommended.

Prince Wolverine Log Splitter Valves

Brand: Prince

Features:

  • Pressure release detent at end of retract stroke/detent in spool in position
  • Relief set to 2,250 PSI
  • Max tank port pressure 500 PSI
  • Max operating temperature 180°F

Sleeve Bushing Pumps

Brand: Permco

We carry the following Permco Series Numbers for Sleeve Bushing Pumps: P124, P197, P257, and P360.  Click on the 'details' button to see a list of specifications for each series.

Steel Upright Truck Mount Hydraulic Tanks

Specifications

Features: Steel tank assembly with diamond plate top section, fully baffled, two 2" NPT bottom ports, internally diffused, dual mounting rails (2"x2") welded tank assembly
Tank is powder coated black
Filtered mushroom vent in tank top for increased air exchange
Filler/breather assembly-including -40 micron filter/breather cap (chain mounted) with nylon strainer basket and bayonet closure
Includes ASK200 mounting and spring kit: four pre-drilled powder coated mounting angles, platted bolts, washers, lock-nuts, four plated springs and four pre-drilled mounting pads
Oil level and temperature sight gauge

Aluminum Upright Truck Mount Tanks

Specifications

Features: Total aluminum construction, top tank section built of Bright Diamond plate, balance bright mill finish, fully baffled.
Two heavy duty machined 2" NPT bottom ports, internally diffused
Filtered mushroom vent in tank top for increased air exchange
Filler/breather assembly-including -40 micron filter/breather cap (chain mounted) with nylon strainer basket and bayonet closure
Dual mounting rails (2"x2") welded to tank assembly
Mounting kit includes four pre-drilled powder coated mounting angles, plated bolts, washers, lock-nuts, four plated springs, and four pre-drilled mounting pads
Oil level and temperature sight gauge

Bezares 3000 Series Truck PTOs

Brand: Bezares

The 3000 Series PTO is designed for the Allison AT/MT/HT model transmissions.  This PTO has a low profile housing for easier mounting and is available with various outputs, ratios as well as either electric over hydraulic or air shift options.

Dump Pumps

Brand: Permco

We carry the following Permco series numbers for Dump Pumps:  DM, DMD, DMR, and DG.

 

THE ONLY DUMP PUMP MADE IN THE USA!

MF Series Flow Control Valves

Provides metered flow in one direction and free-flow in the reverse

Specifications

Features: No "draft" setting.
Calibrated knob provides setting reference.
Soft-seat piston check for leak-free service.
Rugged, all-metal construction - no plastic parts.
Maximum operating pressure 5000 psi

Prince LV Series

Brand: Prince

STANDARD FEATURES ON THE LVS, LVT AND LVR SERIES

 - Economical monoblock construction of high tensile strength gray cast iron

 - Load check on each spool

 - Hard chrome plated spool

 - Adjustable cartridge relief

 - Open center, and power beyond available

 - 4 position float spool loader boom

 - 4 position regen spool for loader bucket

ADDITIONAL FEATURES ON LVT AND LVR SERIES ONLY:

 - Neutral position available

 - 5/16 - 18 UNC mounting holes on both top and bottom of valve

ADDITIONAL FEATURES ON LVS SERIES ONLY:

 - No face seals on spools

 - Molded rubber boot

 - Patent pending, dual spool lock joystick available

Specifications

Flow Rating: LVS - 11 GPM (nominal)
LVT - 10 GPM
LVR - 14 GPM
Max Operating Temp: 180° F
Maximum Operating Pressure: 3000 PSI
Maximum Tank Pressure: 500 PSI (for LVT & LVR)
Recommended Filtration: ISO 4406 17/14
Weight: LVS - 18.5 lbs
LVT - 14.6 lbs
LVR - 22.6 lbs
Showing products: 1 through 25 (128 total)
moc/sciluardyhsetatslla//ofni Info 1