Provides metered flow in one direction and free-flow in the reverse
Economical, medium speed pump recommended for a stationary or mobile application.
100% Polyurethane solid sleeve helps contain leaks and stops abrasions between hoses. Stop hose failure in it's tracks--get the protection you need today!
STANDARD FEATURES ON THE LVS, LVT AND LVR SERIES
- Economical monoblock construction of high tensile strength gray cast iron
- Load check on each spool
- Hard chrome plated spool
- Adjustable cartridge relief
- Open center, and power beyond available
- 4 position float spool loader boom
- 4 position regen spool for loader bucket
ADDITIONAL FEATURES ON LVT AND LVR SERIES ONLY:
- Neutral position available
- 5/16 - 18 UNC mounting holes on both top and bottom of valve
ADDITIONAL FEATURES ON LVS SERIES ONLY:
- No face seals on spools
- Molded rubber boot
- Patent pending, dual spool lock joystick available
The Prince valve model DRV is a differential poppet type double relief. This valve uses the same relief cartridge as the model RV. The double relief is used in systems that require cross-over relief protection such as a reversible hydraulic motor, or systems that require a cushion valve such as double acting cylinders.
Standard elements with 10 Micron Phenol Coated Paper for both FA and FB Series.
These provide filler ports for hydraulic power unit tanks or other liquid reservoirs. Liquids are strained as they are added to the tank and it lets the tank breathe filtered air. The 30-mesh filler screen removes dirt and debris from liquids as they enter the systems. The breather cap filters the air, trapping airborne dirt down to 40- or 10-micron levels. It permits air passage at up to 25scfm. Mounting hardware, gaskets, and templates are supplied.
10 Bolt PTO models for Allison and Caterpillar series transmissions. These PTO's have a wide range or raios, outputs, and either electric over hydraulic shift or sir shift on limited series. Including the 3151, which is a constant mesh option.
4 Bolt SAE Flanges
DXV Cushion Valves are designed to eliminate or minimize shock, surge and overload conditions on hydraulic equipment. They may be used with cylinders of equal displacement or with motors, to provide crossover relief up stoppage. Under standard conditions, when a control valve is in neutral or closed position, the excess pressure created by overload, shock or stress has no possibility of relief through the primary relief valve. A Cushion Valve located between the control valve and the actuator minimizes or eliminates this condition. In a motor application, the need for an anti-cavitation check may be eliminated, since relieved oil is directed into the opposite side of the Cushion Valve. Model DXV, with ball/spring relief valves, has hardened seats for long, trouble-free service. It is available with a PSI check spring which will allow the cushion valve to act as a relief in one direction and permits free-flow at 5 PSI in the opposite direction.
The flows of two fixed displacement pumps are combined to deliver a high volume of oil at low pressure for fast transversion.
The Prince FA Series line type hydraulic filter is a high quality, low cost filtration device for use on systems with flows up to 20 GPM. A built in bypass valve is incorportated in the rugged aluminum housing.
The Prince FB Series line type hydraulic filter is intended for systems with flows up to 45 GPM.
Designed for extremely precise control of hydraulic and pneumatic actuators.
S at the end of the order number denotes that it is made from steel.
This versatile 6-bolt hotshift PTO is designed for the 1000/2000 Allison transmission family, Aisin automatics and a wide range of manual transmissions. The 3200 and 3300 series is offered with multiple ratios and outputs, as well as electric over hydraulic.