Advanced Search
Showing products: 101 through 120 (120 total)

Prince Clevis Pins

Brand: Prince

Prince Cylinder Holding Valve

Brand: Prince

Specifications

Features: Helps eliminate drifting and/or raising of implement wings
Counterbalance valve prevents free fall of cylinders thus preventing cavitation, air ingestion, and jerking
Prevents chatter when all air is completely bled
Locks ports to give a stiff hydraulic system and prevent lurching from side to side
Two cartridge valve block prevents bleed down seen in 3 cartridge valve systems
Can be used with single non-rephrase cylinders. Hookup may vary from circuit above
Valves available: HC-V-AA21 (use with lower flows, typically up to 15 GPM) and HC-V-AA22 (use with larger flows, typically over 12-15 GPM and up to 30 GPM)

Prince Gland End Cap

Brand: Prince

Prince Hair Pin Clips

Brand: Prince

Used on all Prince clevis pins

Prince Hand Pump

Brand: Prince

Prince Hydraulic Cylinder Repair Kit

Brand: Prince

Prince Hydraulic Cylinder Repair Kit

Prince Model SV

Brand: Prince

STANDARD FEATURES:

· 1-10 sections per valve bank with load checks on each section

· Hard chrome plated spools

· Compact construction, reversible handle and power beyond capability

· Enhanced metering section available in both the high and low sections

· Differential poppet style relief, adjustable from 1500 to 3000 psi (low pressure version available - 500 to 1500 psi)

                                                        · Mid-Inlet and lock valve section available

                                                        · Flow control inlet

Specifications

Flow Rating: 12 GPM (nominal)
Max Operating Temp: 180° F (foot mounting)
Maximum Operating Pressure: 3000 psi
Maximum Tank Pressure: 500 psi

Prince Piston

Brand: Prince

Prince Hydraulic Cylinder Piston

Prince Piston Rod

Brand: Prince

Prince Hydraulic Cylinder Piston Rod

Prince PMC Stroke Controls

Brand: Prince

Thread On

Roller Bearing Pumps

Brand: Permco

We carry the following Permco Series Numbers for Roller Bearing Pumps:  P2100, P2500, P3000/3100, P5000/P5100, P5151, and P7500/7600. Click on the 'details' button to see a list of specifications for each series.

Sump Strainers

Sump strainers are used in hydraulic fluids, coolants, lubricants, and many process fluids.  All have strong perforated metal support tubes under the straining elements.  All are available with optional, built-in bypass relief valves to avoid starving the pump should the strainer become dirt clogged.

White D9 Series Motor

Brand: White Drive Products

The D9 Series of motor is the largest member of the White Drive Product's family.  The product is capable of producing torque values comparable to competitive motors, but with an industry leading breadth of displacements and shaft and porting options.  In addition, the product incorporates dual tapered roller bearings, which improve load carrying capabilities.  The motor is designed for use with a case-drain, which reduces pressure on the shaft seal and maintains lubrication to internal drive components, maximizing motor life.  The series is available with industry standard mounting flanges found throughout the global market place.

Specifications

Features: Industry Standard Mounting Flanges that satisfy the global market place
Dual tapered roller bearings improved load carrying capability
Nine displacement options provide industry leading design flexibility
Roller Stator® Design incorporates 8 lobe rotor and 9 pocket stator technology

White DR Series Motor

Brand: White Drive Products

Due to its case drain design, the DR Series motor is an excellent size motor for applications with high-duty cycles or frequent direction reversal.  The case drain design produces a number of benefits including reduction of pressure on the shaft seal and the ability to provide a cooling loop for the system.  The case flow also lubricates the vital drive components, extending motor life.  An internal drain option is also available.    A laminated manifold and three-zone orbiting valve are used to produce higher overall efficiencies and more usable power.  A steel faced seal in the orbiting valve also reduces the risk of the seal extruding or melting, which is possible in competitive designs.

Specifications

Features: Four bearing options allow load carrying capabilities of motor to be matched to application
Heavy-duty drive link is the most durable in its class and receives case flow lubri-cation for reduced wear and increased life
Three-zone orbiting valve precisely meters oil to produce exceptional volumetric efficiency
Rubber energized steel face seal does not extrude or melt under high pressure or high temperature
Standard case drain increases shaft seal life by reducing pressure on seal

White HB Series Motor

Brand: White Drive Products

The HB Series motor is the leader in its class, offering high efficiency and durability.  The three-zone orbiting valve, laminated manifold and Roller Stator® motor work harmoniously to produce high overall efficiencies over a wide range of operating conditions.  The standard case drain increases shaft seal life by reducing internal pressures experienced by the seal.  Case oil leakage is also directed across all driveline components, increasing motor life.  An internal drain option is also available.  At the heart of the motor is a heavy-duty drivelink, offering 30% more torque capacity than competitive designs.  These features make the HB Series motor the preferred choice for applications requiring peak efficiency for continuous operation.

Specifications

Features: Forced drive link lubrication reduces wear and promotes longer life from motor
Heavy-duty drive link is up to 30% stronger than competitive designs for longer life
Three-zone orbiting valve precisely meters oil to produce exceptional volumetric efficiency
Rubber energized steel face seal does not extrude or melt under high pressure or high temperature
Standard case drain increases shaft seal life by reducing pressure on seal

White RE Series Motor

Brand: White Drive Products

RE Series motors offer the perfect compromise between price and performance by producing work horse power at a reasonable cost.  Although these motors perform well in a wide range of applications, they are especially suited for low flow, high pressure applications.  During startup, pressure causes the balance plate to flex toward the rotor, vastly improving volumetric efficiency.  As the motor reaches operating pressure, the balance plate relaxes, allowing the rotor to turn freely which translates into higher mechanical efficiences.  Transmitting this power to the output shaft is the most durable drive link in its class. Four bearing options, combined with standard mounting flanges and output shafts, allow the motor to be configured to suit nearly any application.

 

Specifications

Features: High pressure shaft seal offers superior seal life and performance and eliminates need for case drain
Heavy-duty drive link is the most durable in its class and receives full flow lubrication to provide long life
Valve-In-Rotor Design provides cost effective, efficient distribution of oil and reduces overall motor length
Pressure-compensated balance plate improves volumetric efficiency at low flows and high pressure
Three bearing options allow load carrying capability of motor to be matched to application

White RS Series Motor

Brand: White Drive Products

RS Series mtors are the most economical model in the White Drive Products product line, but are not low-tech.  Unlike competitive products using power robbing, two-piece rotor set designs with sliding contact points, RS Series motors utilize the patented Roller Stator® design.  Seven precision rollers for the contact points reduce friction, providing more power and longer life for your application.  Each output shaft is custom ground to maintain exact tolerances between the housing and shaft, producing high volumetric efficiencies.  Industry standard mounting flanges and output shafts allow the RS Series motors to interchange with competitive designs. 

Specifications

Features: Match ground shaft is matched to housing bore to maintain highest volumetric efficiencies
High pressure shaft seal offers superior seal life and performance and eliminates the need for case drain
Pressure fed bearing surface receives positive flow of clean, cool oil
Heavy-duty drive link receives full flow lubrication to provide long life
Roller Stator® motor design increases efficiency and life by using roller contact versus solid, sliding contact design

White WS Series Motors

Brand: White Drive Products

The WS product family featuares flow rates up to 76 LPM (20 GPM), torque up to 824 Nm (7,925 lb-in), and pressures up to 207 bar (3000 psi) at continuous ratings.  The WS targets agricultural equipment, skid steer attachments, and other applications that require greater torque under demanding conditions.  A distinguishing feature of the WS in relation to competitive products is its heavy duty drive link with a larger pitch diameter.  This enables the WS to to better withstand pressure and torque spikes and is reflected in its intermittent and peak performance ratings.  Additional product features include a three zone commutator valve, heavy-duty tapered roller bearings, and case drain with integral internal drain. 

Specifications

Features: Heavy-duty tapered roller bearings for extra side load capacity
Heavy-duty drive link with larger pitch diameter than competitors for greater resistance to pressure and torque spikes
Three zone commutator valve for high flow capacity
Standard case drain with integral internal drain for extended shaft seal life

Wolverine 3,000 PSI Welded Clevis Cylinders

Brand: Wolverine/Prince

Specifications

Features: 100% test for quality assurance
North American sourced seals for dependability
Hard chrome rod plating for corrosion & wear resistance
Cast steel end fittings for high strength and low cost
Top port design
SAE O-Ring ports for reliable & leak-free connection
Thread-in gland design for serviceability
High luster black paint for protection from the elements
Individually bagged and boxed for secure storage & transport

Wolverine Log Splitter Valve

Brand: Wolverine/Prince

Features:

  • Pressure release detent at end of retract stroke/detent in spool in position
  • Relief set to 2,250 PSI
  • Max tank port pressure 500 PSI
  • Max operating temperature 180° F

Specifications

Max Flow: 30 GPM
Max PSI: 3265
Port Size 1/2" NPTF (work)
3/4" NPTF (in/out)
Showing products: 101 through 120 (120 total)